As I was finishing up my web post late last night my Nikon message screen popped open with the announcment of cameral control pro upgrade to V 2.7.1. As I had written in my previous Blog about the D3 Firmware upgrade , camera control could not access the new features of the firmware, so an upgrade was anticipated.
- Support for D3 A/B 2.02 firmware has been added. When a D3 with firmware 2.02 installed is connected, settings are modified as follows:
- When the ISO Auto box under Sensitivity in the Exposure 2 tab is checked and the Detail… button clicked to specify the maximum sensitivity, the steps available can now be selected from 1/3 step, 1/2 step and 1 step from Custom Setting b1 ISO sensitivity step value.
- The length of time the camera waits before adjusting focus in response to sudden changes in the distance to the subject can now be selected from 5 (Long), 4, 3 (Normal), 2, and 1 (Short) from Custom Setting a4 Focus tracking with lock-on.
- Dynamic AF area can now be specified for FUNC. button + dials with Custom Setting f4 Assign FUNC. button (f5 Assign preview button>Preview + command dials, f6 Assign AE-L/AF-L button>AE-L/AF-L + command dials) .
- Support for D700 A/B 1.02 firmware has been added. When a D700 with firmware 1.02 installed is connected, settings are modified as follows:
- When the ISO Auto box under Sensitivity in the Exposure 2 tab is checked and the Detail… button clicked to specify the maximum sensitivity, the steps available can now be selected from 1/3 step, 1/2 step and 1 step from Custom Setting b1 ISO sensitivity step value.
- The length of time the camera waits before adjusting focus in response to sudden changes in the distance to the subject can now be selected from 5 (Long), 4, 3 (Normal), 2, and 1 (Short) from Custom Setting a4 Focus tracking with lock-on.
